Shared by Infamous_HawkInfamous_Hawk
- 05 Jul 2020 10:00

rating: 0+x

Configuration to play Shadow of the Tomb Raider with JoyShockMapper

# Configuration for Shadow of the Tomb Raider - Adds Gyro fine aiming to normal PS4 controls 
# Infamous_Hawk

RESET_MAPPINGS
# Aim settings
# Gyro sens of 1 means you'll turn the same amount in game as in the real world
MIN_GYRO_SENS = .25
MAX_GYRO_SENS = .5
# Gyro thresholds are in degrees per second
MIN_GYRO_THRESHOLD = 0
MAX_GYRO_THRESHOLD = 75

# Stick sensitivity is in degrees per second
STICK_SENS = 50
STICK_POWER = 1
STICK_ACCELERATION_RATE = 0
STICK_ACCELERATION_CAP = 2
#RIGHT_STICK_MODE = FLICK
RIGHT_STICK_MODE = AIM

GYRO_ON = ZL     # Turn on gyro when ZL is pressed

Infamous_Hawk's Notes

- Set "Enable Steam Input" to Off in the options to allow SotTR to pick up the PS4 natively.
- Prompts will be the proper PS4 buttons but aiming with the Left Trigger will turn on gyro aiming, similar to TLoZ: Breath of the Wild.

How to Use this Config

Using JoyShockMapper configurations is easy once you know how. If you haven't used it before, check out the guide. For using a community config like this one, you only need to get through the first two sections — Installing JSM and Using an already-made configuration file.

Just copy the above configuration into a text file, change the IN_GAME_SENS to match your in-game settings, and then drag that file into JoyShockMapper and hit Enter to use it right away. Some games have their own limitations with certain controllers or require some extra setup, so make sure to check for any notes near top of the main Shadow of the Tomb Raider page.