Shared by Infamous_HawkInfamous_Hawk
- 05 Jul 2020 09:57

rating: 0+x

Configuration to play Shadow of the Tomb Raider with JoyShockMapper

# Configuration for Shadow of the Tomb Raider - Adds Gyro fine aiming and keyboard mappings to Switch Controller Pro 
# Infamous_Hawk

RESET_MAPPINGS
# Aim settings
# Gyro sens of 1 means you'll turn the same amount in game as in the real world
MIN_GYRO_SENS = .25
MAX_GYRO_SENS = .5
# Gyro thresholds are in degrees per second
MIN_GYRO_THRESHOLD = 0
MAX_GYRO_THRESHOLD = 75

# Stick sensitivity is in degrees per second
STICK_SENS = 50
STICK_POWER = 1
STICK_ACCELERATION_RATE = 0
STICK_ACCELERATION_CAP = 2
#RIGHT_STICK_MODE = FLICK
RIGHT_STICK_MODE = AIM

LUP = W          # Move foward
LDOWN = S        # Move back
LRIGHT = D       # Move right
LLEFT = A        # Move left
L3 = SHIFT       # Sprint
W = E            # Interact
S = SPACE        # Jump / Climb
E = C CONTROL    # Scramble/roll/drop/dodge / Swim down
N = F            # Melee
R3 = Q           # Survival instinct
ZL = RMOUSE      # Aim
GYRO_ON = ZL     # Turn on gyro when ZL is pressed
ZR = LMOUSE      # Primary fire while aiming
ZL,W = MMOUSE    # Secondary fire while aiming
ZL,W = R         # Reload while aiming
ZL,R3 = Z        # Zoom while aiming
ZL,L3 = SHIFT    # Shoulder Swap while aiming
UP = 1           # Select bow
DOWN = 2         # Select pistol
LEFT = 4         # Select shotgun
RIGHT = 3        # Select rifle
- = TAB          # Journal
#+ = ESC         # Pause

Infamous_Hawk's Notes

- Maps all the default keyboard buttons onto their default gamepad equivalents with the exception of +/option not being mapped, as that should be mapped to ESC on the keyboard. JoyShockMapper does not allow mappings to ESC, and SotTR does not allow pause to be re-mapped to another keyboard button.

How to Use this Config

Using JoyShockMapper configurations is easy once you know how. If you haven't used it before, check out the guide. For using a community config like this one, you only need to get through the first two sections — Installing JSM and Using an already-made configuration file.

Just copy the above configuration into a text file, change the IN_GAME_SENS to match your in-game settings, and then drag that file into JoyShockMapper and hit Enter to use it right away. Some games have their own limitations with certain controllers or require some extra setup, so make sure to check for any notes near top of the main Shadow of the Tomb Raider page.