Shared by ex0rsystex0rsyst
- 04 Aug 2020 19:15

rating: 0+x

Configuration to play Risk of Rain 2 with JoyShockMapper

# Aim settings
# Gyro sens of 1 means you'll turn the same amount in game as in the real world
MIN_GYRO_SENS = 1
MAX_GYRO_SENS = 1
# Gyro thresholds are in degrees per second
MIN_GYRO_THRESHOLD = 0
MAX_GYRO_THRESHOLD = 75

# Other button and LStick settings
LLEFT = A
LRIGHT = D
LUP = W
LDOWN = S
R = SHIFT
L = R
ZR = LMOUSE
ZL = RMOUSE
E = E
S = SPACE
W = B
N = Q
+ = ESC
- = TAB
R3 = MMOUSE
L3 = CTRL
UP = UP
DOWN = DOWN
LEFT = LEFT
RIGHT =  RIGHT

# Stick sensitivity is in degrees per second
STICK_SENS = 360
STICK_POWER = 4
STICK_ACCELERATION_RATE = 1
STICK_ACCELERATION_CAP = 2
RIGHT_STICK_MODE = FLICK
REAL_WORLD_CALIBRATION = 2
IN_GAME_SENS = 0.1
#RIGHT_STICK_MODE = AIM

ex0rsyst's Notes

Maps the default keyboard keybindings to sensible buttons on the joycons.

How to Use this Config

Using JoyShockMapper configurations is easy once you know how. If you haven't used it before, check out the guide. For using a community config like this one, you only need to get through the first two sections — Installing JSM and Using an already-made configuration file.

Just copy the above configuration into a text file, change the IN_GAME_SENS to match your in-game settings, and then drag that file into JoyShockMapper and hit Enter to use it right away. Some games have their own limitations with certain controllers or require some extra setup, so make sure to check for any notes near top of the main Risk of Rain 2 page.