Shared by Neroeclipse1Neroeclipse1
- 23 Jun 2020 00:17

rating: 0+x

Configuration to play Paladins with JoyShockMapper

 #Configuration for paladin with stick/Gyro
# Nero Eclipse
# (Any line that starts with # is ignored by JoyShockMapper)
# First, reset to defaults so we don't have to set values we don't care about
RESET_MAPPINGS
#GyroConfigs/_3Dcalibrate.txt
#CALCULATE_REAL_WORLD_CALIBRATION
# Calibrate. Flick stick relies on good calibration; gyro and stick sens make more sens with it, too
REAL_WORLD_CALIBRATION = 110.26
IN_GAME_SENS = 6.5
# Please set IN_GAME_SENS to your in game mouse speed setting whenever you change it

# Button mappings
LLEFT = A
LRIGHT = D
LUP = W
LDOWN = S
LEFT = `
RIGHT = V
UP = Y
DOWN = K
ZR = LMOUSE
ZL = RMOUSE
R = E
L = Q
N = F
W = R
E = I
S = SPACE
L3 = LCONTROL
R3 = 
+ = ESC
- = TAB
# Don't map E to any keys because we only want to use it for disabling gyro
GYRO_OFF = E

# Gyro mouse setup
MIN_GYRO_SENS = 8
MAX_GYRO_SENS = 16
GYRO_CUTOFF_RECOVERY = 5
MIN_GYRO_THRESHOLD = 5
MAX_GYRO_THRESHOLD = 75
GYRO_SMOOTH_THRESHOLD = 5

RIGHT_STICK_MODE = AIM
STICK_SENS = 360
STICK_POWER = 1
STICK_ACCELERATION_RATE = 1
STICK_ACCELERATION_CAP = 1 
# In case you want to use the right stick instead

# Include mouse settings
GyroConfigs/_3Dmouse.txt

Neroeclipse1's Notes

If flick_stick is still active just copy and paste the commands into the program

How to Use this Config

Using JoyShockMapper configurations is easy once you know how. If you haven't used it before, check out the guide. For using a community config like this one, you only need to get through the first two sections — Installing JSM and Using an already-made configuration file.

Just copy the above configuration into a text file, change the IN_GAME_SENS to match your in-game settings, and then drag that file into JoyShockMapper and hit Enter to use it right away. Some games have their own limitations with certain controllers or require some extra setup, so make sure to check for any notes near top of the main Paladins page.