Shared by tekgeekstertekgeekster
- 16 Nov 2021 07:15

rating: 0+x

Configuration to play Halo Infinite with JoyShockMapper

#HaloInfinite.txt

RESET_MAPPINGS

TICK_TIME = 1

RESTART_GYRO_CALIBRATION
SLEEP 2                       # wait two seconds
FINISH_GYRO_CALIBRATION

GYRO_SPACE = PLAYER_TURN
REAL_WORLD_CALIBRATION = 44.445
IN_GAME_SENS = 1
GYRO_SENS = 2.5 2
GYRO_CUTOFF_SPEED = 0.79

VIRTUAL_CONTROLLER = XBOX

UP = X_UP
DOWN = X_DOWN
LEFT = X_LEFT
RIGHT = X_RIGHT
L = X_LB
R = X_RB
W = X_X
S = X_A
N = X_Y
E = X_B
L3 = X_LS
R3 = X_RS
- = X_BACK
+ = X_START
HOME = X_GUIDE
ZL_MODE = X_LT
ZR_MODE = X_RT
LEFT_STICK_MODE = LEFT_STICK
RIGHT_STICK_MODE = RIGHT_STICK

TOUCH = ^GYRO_OFF

tekgeekster's Notes

This is only for Xbox series s/x controllers that have an Xone se adapter plugged into the bottom without the added usb cable plugged into the top port. Set the adapter to PS4 mode and connect both the adapter and xbox controller to your pc. They'll act as one controller in JSM, and the gyro will be run through the Xone dongle bellow,
I use the touchpad emulation button on the left to toggle gyro on and off.

How to Use this Config

Using JoyShockMapper configurations is easy once you know how. If you haven't used it before, check out the guide. For using a community config like this one, you only need to get through the first two sections — Installing JSM and Using an already-made configuration file.

Just copy the above configuration into a text file, change the IN_GAME_SENS to match your in-game settings, and then drag that file into JoyShockMapper and hit Enter to use it right away. Some games have their own limitations with certain controllers or require some extra setup, so make sure to check for any notes near top of the main Halo Infinite page.